Articles

Supporting Vendor SDHQ Offroad (click here) has put together an incredibly comprehensive "how to" regarding removing the Raptor's factory l...

Supporting Vendor SDHQ Offroad (click here) has put together perhaps the most comprehensive "how to" regarding adjusting the Raptor's Fox Sh...

The passenger and driver sides are enabled/disabled independently.

This is taken from the 2010 F150 Owners Manua...

From the 2010 Ford F150 Owners Manual (This has been confirmed to apply to the 2009 F150 and F250 as well)

1. Press and release the...

This is for the 2010 Raptor:

There seems to be two part numbers for the 5.4L; one for those Raptor's equipped with Nav (pn 10346 GL-987) and for...

Contrary to what the manual says, there is in fact a transmission dip stick present on the 6R80. Thanks to GasGasMan for this excellent drawing,...

While the manual doesn't specifically say you should do this after any mod you make, its probably a good idea. Your ECU (Electronic Control Unit,...

You need a 15mm socket to remove the old skid and a T40 bit to put the new oil filter door on your new skid (it does not come pre-assembled).
...